Element has an opportunity for a EMC Test Technician to join our rapidly expanding team. As a member of the operations team, the primary function of the EMC Test Technician will be to focus on conducting compliance testing (setup, measure, and document results) on a wide variety of products while interfacing with customers on a daily basis. The most common radio products include, but is not limited to, Wi-Fi, BT, NFC and Cellular radios. You should possess a basic understanding of the following standards: MIL-STD-461, RTCA DO160, EN 55032, EN 55035, FCC 15B, IEC 60601-1-2, ETSI EN 301-489-1, EN 300 328, EN 301 893, ANSI C63.10, FCC 15C, RSS-GEN. 

Element has an opportunity for three Associate Test Technicians to join our rapidly expanding team.  Element is a test facility for wireless device certification, conducting regulatory and conformance testing for network test services. As a member of the Over-The-Air (OTA) team at our Columbia, MD lab, the Associate Test Technician position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under direct supervision. If you are excited to start a career in electrical or RF engineering testing and compliance, you are encouraged you to apply! Salary Range: $22.00 - $24.20 p/hourRole Type: SeasonalWork Shifts: Day/First shift: 8am - 4:30pm (Extended hours will be expected) and Evening/Second...

Element has an opportunity for a Machine Operator to join our rapidly expanding team. As a member of the operations team, the Machining position performs a variety of routine and non-routine machining assignments within the department assigned and insures timely and accurate test results under direct supervision.  The operator position must be proficient in a number of core business skills including but not limited to compliance to established safety rules, code of conduct, and company policies and procedures. Salary: $20.50 - $24/hr DOE  

Element has an opportunity for a certified NDT - Fluorescent Penetrat Inspector Level II (2nd shift) to perform Liquid Penetrant Testing using specific techniques on aerospace products. Uses knowledge of products, manufacturing processes, equipment set-up, and NDT methods to process parts for inspection following specific operating procedures. Interprets and evaluates test results Salary: $22- $28/hr DOE  

Element tiene la oportunidad de que un Técnico de NDT FPI se una a nuestro equipo en rápida expansión. Como miembro del equipo de operaciones, el puesto de Técnico FPI realiza una variedad de asignaciones de pruebas de rutina y no rutinarias dentro del departamento asignado y asegura resultados de prueba precisos y oportunos bajo supervisión directa. Los puestos de Técnico de FPI deben ser competentes en una serie de habilidades comerciales básicas que incluyen, entre otras, el cumplimiento de las reglas de seguridad establecidas, el código de conducta y las políticas y procedimientos de la empresa. 

Element has an opportunity for a new Customer Credit and Onboarding Specialist to join our team in Cincinnati. This is a great opportunity to join one of the fastest growing companies in the Testing, Inspection and Certification sector (TIC).  In this role, you will report to the Credit Manager and will be responsible for the primary support of the customer onboarding process. You will work with Element Labs and customers to set up new accounts and communicate with internal and external customers effectively; ensuring that all Element policies are being adhered to during the onboarding process. If you are passionate about delivering a best-in-class experience through effective collaboration, this role is for you. Hybrid role: 3 days in office + 2 days remote

Element has an opportunity for a Machine Operator (2nd Shift) to join our rapidly expanding team. As a member of the operations team, the Machining position performs a variety of routine and non-routine machining assignments within the department assigned and insures timely and accurate test results under direct supervision.  The operator position must be proficient in a number of core business skills including but not limited to compliance to established safety rules, code of conduct, and company policies and procedures. Salary: $25- $30/hr DOE + $1 shift differential Hours: 3pm - 11pm 

Element has an opportunity for a Machine Operator (3rd Shift) to join our rapidly expanding team. As a member of the operations team, the Machining position performs a variety of routine and non-routine machining assignments within the department assigned and insures timely and accurate test results under direct supervision.  The operator position must be proficient in a number of core business skills including but not limited to compliance to established safety rules, code of conduct, and company policies and procedures. Salary: $25- $30/hr DOE + $2 shift differential Hours: 11pm - 7am 

Element has an opportunity for a Machine Operator to join our rapidly expanding team. As a member of the operations team, the Machining position performs a variety of routine and non-routine machining assignments within the department assigned and insures timely and accurate test results under direct supervision.  The operator position must be proficient in a number of core business skills including but not limited to compliance to established safety rules, code of conduct, and company policies and procedures. Salary: $20.50 - $24/hr DOE  

Element has an opportunity for a Mechanical Technician (12 hour shift) to join our growing team. This is a great opportunity to develop your career within a Global TIC business. Rotating 12 hour Panama shift (3 on, 2 off, 2 on, 3 off) 4am-4pm Salary: $20- $25/hr DOE  

Element has an opportunity for a Mechanical Technician to join our growing team. This is a great opportunity to develop your career within a Global TIC business. Salary: $20 - $25/hr DOE   

Element has an opportunity for an AssociateCorrosioni Technician whose primary responsibility is to perform routine, metallurgical, mechanical, failure, corrosion testing facilitating metallurgy operations at site or at a laboratory. Our Cambridge laboratories provide state-of-the-art capabilities in corrosion testing and analysis, chemistry, mechanical testing, hydrogen embrittlement and stress rupture testing, along with metallurgical and failure analysis.  If you are not currently authorized to work in Canada, Element Materials Technology will not consider your job application. Any candidate must be lawfully eligible to work in Canada as a Canadian Citizen or Permanent Resident of Canada. Pay rate $21-23/hr CAD 

Join Element as a Business Development Manager – West Coast Region Are you a strategic thinker with a passion for driving growth and building lasting client relationships? Element is seeking a dynamic Business Development Manager to lead sales efforts across named accounts within our West Coast territory. In this high-impact role, you’ll be responsible for identifying and pursuing new business opportunities, promoting the full suite of Element’s services, and achieving revenue targets within your assigned accounts. You’ll also play a key role in supporting strategic and key accounts at the local level, ensuring seamless service delivery and client satisfaction. Base pay up to 130K + Sales Compensation Plan (DOE) 

Element has an opportunity for a Digital Radiography NDT Level II Technician, the person that takes this position will gain the experience and training to reach NDT Level III certification. This position deals with a diverse products, including castings, welds, composites and assemblies. This opportunity will give a very diverse experience to grow your NDT knowledge, accelerating your career development by leading the way and developing solutions to complex manufacturing issues, providing real time feedback to the engineering team. You will be responsible for conducting Computed tomography testing using state of the art technology in accordance with company approved procedures while paying close attention to safety and project timelines. Specifically developing scanning protocol,...

Element tiene la oportunidad de que un Técnico de NDT IUT se una a nuestro equipo en rápida expansión. Como miembro del equipo de operaciones, el puesto de Técnico IUT realiza una variedad de asignaciones de pruebas de rutina y no rutinarias dentro del departamento asignado y asegura resultados de prueba precisos y oportunos bajo supervisión directa. Los puestos de Técnico de IUT deben ser competentes en una serie de habilidades comerciales básicas que incluyen, entre otras, el cumplimiento de las reglas de seguridad establecidas, el código de conducta y las políticas y procedimientos de la empresa. 

Element has an opportunity for a Dynamics Test Technician to join our rapidly expanding team. As a member of the operations team, the Dynamics Test Technician position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under direct supervision.   Salary: $20- $30/hr DOE  

Element has an opportunity for a Nondestructive Etch Trainee (3rd Shift) to join our growing team. To conduct daily Etch tests in accordance with company approved procedures while paying close attention to safety and project timelines. Salary: $22.50 - $25/hr DOE Hours: 11pm to 7:30am 

Element has an opportunity for a Snubber Technician II in our Huntsville, AL lab.  In this role, you will be responsible for performing tests and/or measurement tasks for the Nuclear Snubber department. Nuclear Snubber: Testing and rebuilding of snubber devices at nuclear power plants during outages. Please note, this is a casual role with irregular working hours and is expected to travel up to 100% of the time. Salary: $26- $38/hr DOE  

Element has an opportunity for a Snubber Technician in our Huntsville, AL lab.  In this role, you will be responsible for performing tests and/or measurement tasks for the Nuclear Snubber department. Nuclear Snubber: Testing and rebuilding of snubber devices at nuclear power plants during outages. Please note, this is a casual role with irregular working hours and is expected to travel up to 100% of the time.Salary: $22- $32/hr DOE  

 Element is on the lookout for a dynamic and detail-driven ERP Training Specialist to support the global rollout of our enterprise-wide implementation of Microsoft Dynamics 365 Finance & Operations (D365 F&O) and related digital solutions. As a key player on our Training & Transformation team, you’ll be at the heart of a major global initiative that’s reshaping how we work. Your mission? To deliver engaging training experiences that prepare our teams for a seamless transition to new systems and streamlined business processes. This position is remote with 50% domestic travel. 

We're looking for a skilled Calibration Technician to ensure the accuracy and reliability of our critical measurement systems Salary: $20- $25/hr DOE  

Element is seeking a Senior Electro Dynamics Service Technician for the Technical Services Group (TSG) within Element Product Qualification Testing (PQT). TSG is responsible for overseeing standardization and ensuring technical excellence across the entire network of Aerospace and Energy PQT laboratories. As an Electrodynamic Service Technician, you will manage all service and repair needs for a fleet of over 50 electrodynamic systems. This role requires frequent travel to 10+ key locations throughout the U.S. and Canada to provide hands-on support and maintenance. The service technician will work out of one of our primary dynamics test facilities (Huntsville Alabama, Boxborough Massachusetts, or Longmont Colorado) but will also support the entire North American region. This position...

Element has an opportunity for a Planner/Expeditor to join our rapidly expanding team. This individual will plan and schedule all open orders within appointed departments. Answer customer status phone calls and emails. Expedite orders to meet customer demands. Communication with customers to update completion dates and communicate with other planner to organize multi-process orders to ensure smooth production flow. Salary: $24- $26/hr DOE  

We are looking for an experienced and certified Ultrasonic Testing (UT) Technician – Level II to join our inspection team. This role requires a professional with strong technical skills to perform and interpret ultrasonic testing in accordance with industry standards. The UT Level II Technician will be responsible for setting up and calibrating equipment, conducting inspections, and evaluating results with minimal supervision.Salary: $24-30/hour DOE (Depending on Experience)Additional $1/hour pay for shift working (working on 2nd shift from 1:00pm - 9:30pm) 

A Heat Treat Technician (2nd Shift) is responsible for operating heat treatment equipment to alter the hardness, strength, ductility, or other properties of metal components. This is done to meet design specifications, improve durability, or prepare parts for further machining or use.  Salary: $22-$24/hour + 1.00 Shift Differential Hours: 2pm - 10:30pm   

Element has an opportunity for a EMI/EMI Test Tech II to join our rapidly expanding team. As a member of the operations team, the Test Technician position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision. The technician positions must be proficient in a number of core business skills including but not limited to compliance to established safety rules, code of conduct, and company policies and procedures. Salary: $20- $33.50/hr DOE  

Element has an opportunity for a NDT - Ultrasonic Inspector, Nas 410 Level I and Level II (3rd Shift) to perform Testing using specific techniques on aerospace products. Uses knowledge of products, manufacturing processes, equipment set-up, and NDT methods to process parts for inspection following specific operating procedures. Interprets and evaluates test results. This position will also be required to travel to perform setups/calbriations/repairs to UT systems across the Element network. Salary: $25- $35/hr DOE  Hours:  

Element has an opportunity for a Calibration and Maintenance Manager to join our rapidly expanding team. The Calibration and Maintenance Manager is responsible for ensuring that all EMC, RF, and SAR test equipment across Element’s laboratories is properly calibrated, maintained, and audit-ready in accordance with internal standards and ISO/IEC 17025 requirements. This role supports not only the California lab but also collaborates with other locations (e.g., Maryland, Suwon) to maintain global consistency. Responsibilities include calibration oversight, equipment/system checks, chamber maintenance, audit preparation, and cross-site technical support. The ideal candidate is proactive, detail-oriented, and experienced in managing technical lab environments with diverse equipment...

Element has an opportunity for a Test Technician to join our rapidly expanding team.As a member of the operations team, the Test Technician position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under direct supervision.  The technician positions must be proficient in a number of core business skills including but not limited to compliance to established safety rules, code of conduct, and company policies and procedures. Salary: $22- $28/hr DOE  

We are seeking a reliable and detail-oriented Machine Operator (2nd shift) to set up, operate, and maintain machinery in a safe and efficient manner. The ideal candidate will be responsible for ensuring equipment runs smoothly, producing high-quality parts or products according to specifications. This role plays a critical part in our production process, requiring attention to detail, mechanical aptitude, and a commitment to safety and productivity.Shift 1: 6:00am - 2:30pmCompensation: $22.00/hour to $24.00/hour (depending on experience)  

Element has an opportunity for a regular full-time Logistics/Operations Specialist. The individual will be responsible for receiving parts, verifying BOL information, and shipping and receiving. This Position will be responsible for pulling DSQR parts for inspection and boxing for shipping. This individual will also cross-train in various areas to support the needs of the business. Salary: $20- $25/hr DOE  

We are looking for an enthusiastic and experienced Digital Forensic Incident Responder (DFIR) to join our dynamic and growing team.  You will play a critical role in maintaining the security and resilience of Element’s digital infrastructure by effectively handling cyber incidents.  This is an opportunity to join an emerging team and become a key contributor on day one.  You will work closely with peers to develop what you see as a great 24/7 operational cyber defense capability.  We encourage applications from those with direct experience in Digital Forensics and Incident Response (DFIR).   This position requires paid on call and overtime if there are serious cyber-attacks.   Compensation: Base salary + overtime paid when working on serious incidents.  

Element has an opportunity for a NDT - Fluorescent Penetrant Inspector (2nd shift) to perform Liquid Penetrant Testing using specific techniques on aerospace products. Uses knowledge of products, manufacturing processes, equipment set-up, and NDT methods to process parts for inspection following specific operating procedures. Interprets and evaluates test results Salary: $20- $25/hr DOE  

Join Element Materials Technology as an IUT NDT Inspector Trainee (3rd Shift) and embark on an intensive, fast-tracked training program designed to rapidly advance you from trainee to Level 2 certification in ultrasonic immersion inspection. As part of an elite group of six new hires, you’ll gain hands-on experience and expert mentorship within a dynamic, industry-leading company committed to your professional growth. This role offers a unique opportunity to achieve lifetime NDT Level 2 certification, setting a strong foundation for a long and successful career. If you’re driven to excel and eager to develop world-class skills in a cutting-edge environment, this is the perfect role for you. Salary: $20.50- $22.50/hr DOE  

Join Element Materials Technology as an IUT NDT Inspector Trainee (2nd Shift) and embark on an intensive, fast-tracked training program designed to rapidly advance you from trainee to Level 2 certification in ultrasonic immersion inspection. As part of an elite group of six new hires, you’ll gain hands-on experience and expert mentorship within a dynamic, industry-leading company committed to your professional growth. This role offers a unique opportunity to achieve lifetime NDT Level 2 certification, setting a strong foundation for a long and successful career. If you’re driven to excel and eager to develop world-class skills in a cutting-edge environment, this is the perfect role for you. Salary: $20.50- $22.50/hr DOE  

Element has an opportunity for an Entry level Etch Technician who will be trained/qualified to set up, operate and maintain equipment, to perform etch and to interpret, evaluate and document the results in accordance with procedures approved by a Level III. Salary: $20- $25/hr DOE  

We’re looking for a detail-oriented and highly organized Logistics & Inventory Specialist to join our team. In this role, you’ll handle the full flow of materials and samples—receiving, tagging, and distributing inventory across multiple buildings—while ensuring accuracy, traceability, and efficiency. You’ll coordinate shipments, manage waste and consumables, and serve as a key point of contact for shipping or receiving issues with customers and internal teams. If you’re someone who thrives under deadlines, can juggle multiple priorities without losing your cool, and has at least a year of logistics or warehouse experience, we want to hear from you. Expect to use your Microsoft Office skills, your forklift know-how (or willingness to learn), and your communication abilities to keep...

Element has an opportunity for a EMI/EMI Test Tech II to join our rapidly expanding team. As a member of the operations team, the Test Technician position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.  The technician positions must be proficient in a number of core business skills including but not limited to compliance to established safety rules, code of conduct, and company policies and procedures. Salary: $20- $33.50/hr DOE  

Element has an opportunity for EMI Test Technicians to join our rapidly expanding team. Candidates with varying levels of experience will be considered from those starting their testing careers to those with several years of EMI or related testing experience. This role involves performing routine and non-routine EMI testing assignments, preparing equipment, analyzing results, and maintaining accurate records, all while complying with company safety and quality standards. Salary: $24 – 35/hr DOE  

Element has an opportunity for a Business Development Manager responsible for named accounts within a specific geographic area. In this role you will be responsible for pursuing sales opportunities to sell the full breadth of Element services within specified accounts in order to meet their assigned budget. You will support strategic or key accounts within your specified territory with any activities needed at local sites. This is a great opportunity for professional development in the TIC Industry. Candidates must live in the Midwest region.  

The Account Specialist plays a key role in driving customer engagement and revenue growth by proactively managing and expanding client relationships. Typical objectives include:- Reactivating dormant or declining accounts through strategic outreach and personalized engagement.- Increasing wallet share by identifying opportunities with new and existing customers.- Gathering actionable feedback on marketing campaigns and sales materials to inform future initiatives.- Uncovering new RFQ (Request for Quotation) opportunities to support business development and pipeline growth.This role requires a proactive mindset, strong communication skills, and a customer-centric approach to uncover needs, build trust, and deliver value.  

Element has an opportunity for a Senior Accountant to join our growing team. This is a great opportunity to develop your Accountancy career within a Global TIC business.  This is a hybrid position, must be able to go into the office 3 days a week.  

Element has an opportunity for a Dynamics Test Technician to prepare and conduct tests, collect and analyze test results, and prepare test reports for assigned customer test programs.At Element our shared purpose of ‘Making tomorrow safer than today’ is what brings us together. We are energized by our ambition to make the world a better place and create a safer future for people. This is what sets us (and you, if you join us…) apart from the crowd.Join us as a Dynamics Test Technician and see how your variety of routine and non-routine testing make a difference and how critical it is to helping us deliver on our purpose and achieve our goals.  Salary: $25-$33/hr 

Element has an opportunity for an Entry-Level Nuclear Testing Engineer supports the analysis, testing, and evaluation of mechanical systems with emphasis on fluid dynamics and thermal performance in safety-related applications. The engineer assists in ensuring that nuclear systems, structures, and components meet safety and regulatory requirements by performing thermal-hydraulic analyses, conducting mechanical testing, and supporting engineering evaluations under the direction of senior staff. Salary: $70,000 - $80,000/yr DOE  

Element is seeking a highly motivated and experienced Lead-to-Cash (LTC) Transformation Manager to drive the modernization of our Order-to-Cash and Customer Management processes as part of our global ERP transformation. This role will support the implementation of Microsoft Dynamics 365 for Finance and Operations (D365 F&O) across multiple legal entities and business units, enabling standardized, efficient, and scalable LTC processes. You will play a key role in ensuring the successful adoption of D365 F&O, collaborating across functions to improve the customer experience, streamline revenue recognition, and integrate critical upstream and downstream systems including CRM (D365 CE), LIMS, Group CPM (Board), and billing platforms.  This position is hybrid, located in our Blue Ash...

Element has an opportunity for a Machinist to join our rapidly expanding team. As a member of the operations team, the Machining position performs a variety of routine and non-routine machining assignments within the department assigned and insures timely and accurate test results under direct supervision.  The technician positions must be proficient in a number of core business skills including but not limited to compliance to established safety rules, code of conduct, and company policies and procedures. Salary: $24- $36/hr DOE  

We are seeking a detail-oriented and safety-conscious Computed Radiography (CR) Level I Technician to support our non-destructive testing (NDT) operations. The CR Level I Technician will perform image acquisition under the supervision of a Level II or III technician, following approved procedures and industry standards. This role is ideal for individuals beginning their career in NDT who demonstrate a commitment to precision, safety, and professional growth. Salary: $21- $25/hour (Depending on Experience) + $1.00 shift differential Hours: Monday to Friday, 2:00 - 10:30pmRelocation Bonus available.  

Element has an opportunity for a Test Technician to join our rapidly expanding team.As a member of the operations team, the Test Technician position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under direct supervision.  The technician positions must be proficient in a number of core business skills including but not limited to compliance to established safety rules, code of conduct, and company policies and procedures. Salary: $18- $22/hr DOE  

Element has an opportunity for a Business Development Manager within our Aerospace & Energy business unit. In this role, you will be responsible for pursuing & closing sales opportunities within specified accounts in order to meet & exceed your assigned budget. The ideal candidate will demonstrate a proactive mentality, be action oriented, customer focused and have an entrepreneurial drive. We are looking for candidates with experience in the Aerospace and Defense industry!   

Element is looking for a Building Systems Test Technician to conduct various building envelope performance evaluations to well defined standards and/or operating procedures. This position involves sample preparation, general construction, physical testing, equipment maintenance and client interaction.